Metal Laminates

The name dekorial – starline stands for a high pressure laminate with a genuine aluminium surface. This surface is applied to a core of phenolic resin using high pressure. A highly resistant aluminium surface is obtained by electrical oxidisation for mirror quality or by use of laquer. As the anodized aluminium is an integral part of the surface layer it gives the product a permanent protection against “external”
influences.
A special heat-curing laquer on the basis of an Epoxide resin or a PU laquer is also used in many cases as a protection for the metal surface. The aluminium layer can be delivered if required with a smooth, brushed or embossed surface. The typical metallic character is obtained by pressing in the original colours. A transparent colouration combined with a surface structure gives further openings for
a decorative effect. A slight unevenness in the surface (with structures) and slight variations in shine of
the aluminium surface laminates are one of the features of this product. The slight indentations are at the present stand of the technique and are unavoidable and normal. Slight colour variations occur during the production process and are not detrimental to the overall appearance.
Pure aluminium products are often pressed with a smooth surface. Other surface structures such as Honeycomb (WAF), Barleycorn (GEK) or Pinpoint (PNT) are available. For special effects a groove along or across the board with different embossing (603 – 610) on either side bring out the metallic character.
A 210 Pure aluminium smooth and anodized (Natural) Mirrorquality
A 211 Pure aluminium smooth and anodized (Gold) Mirrorquality
A 216 Pure aluminium smooth and anodized (Gunmetal) Mirrorquality
A 246 Pure aluminium smooth, matt, anodized (Natural)
The optimal mirror-effect is only achieved by using a smooth-metal surface. By
using the grooved structure (see dekovario Prospectus) combined with the
mirror-quality further variations are possible.

The name dekorial-rustikal stands for a high pressure laminate with a pure aluminium
surface which has the appearance of tin. This surface is applied to a core of phenolic resin using high pressure.
All our products are coated with an UV – lacquer based on acryl. The lacquer has
scratch hardness in EN 438 of > 1, 5 N.
The surface is unaffected by common household agents / solvents. Alcohol has no effect. Slight variations of the silky shine / gloss coming from raw aluminium material are unavoidable.

A slight unevenness in the surface as well as a slightly uneven density of the black colour in some of the aluminium surfaced laminates is one of the features of this product. The slight indendations are at the presesent stand of technique and are unavoidable and normal. Slight colour variations occur during the production process and are not detrimental to the overall appearance.

The pure metal surface with the appearance of aluminium combined with rustic surface structures give further openings for a decorative effect in individual decoration. The various products can be embossed in a number of structures.
Backing sheets for rustikal:
A 209 Pure Aluminium smooth/hammered – lacquered HPL (Natural aluminium colour)
We recommend this aluminium quality in smooth and in hammered surface as an inexpensive backing sheet. Dimensions and Quality
Rustikal sheets are delivered in the standard dimensions 2440mm x 1220 mm.
The tolerance limits for the dimensions along and across the sheets as required in
EN 438 are:
- 0 mm and + 10 mm
The rustikal sheets can be produced in thickness from 1.2 mm to 3.0mm.
The standard thickness in the lacquered product is 1.2 mm, giving a density of 2.1
kg/m².
The limits for variations in thickness are governed by EN 438.
Nominal thickness Maximum tolerances
0.6 – 1.0 mm ± 0.10 mm
> 1.0 – 2.0 mm ± 0.15 mm
> 2.0 – 2.5 mm ± 0.18 mm
> 2.5 – 3.0 mm ± 0.20 mm
If thicker sheets of rustikal are required, direct contact with Dekodur® is advisable.
Behaviour in case of fire - the standard quality is classified as B2 – B1 when tested
according to DIN 4102.
For rustikal sheets in the quality “flame retardant” a direct contact with Dekodur® is
advised.
This quality is certified by Lloyd’s Register and fulfils the requirements of IMO FTC.

The name dekorial - antique stands for a high pressure laminate (HPL) with surface
of pure copper. The metal sheet is applied to a core of phenolic resin using high
pressure.
All our products are coated with an UV – lacquer based on acryl. The lacquer has
scratch hardness in EN 438 of
> 1, 5 N.
The surface is unaffected by common household agents / solvents. Alcohol has no
effect. Slight variations of the silky shine / gloss coming from raw copper material are
unavoidable.
A slight unevenness in the surface of the laminates is one of the features of this
product. The slight indentations are at the present stand of the technique and are
unavoidable and normal. The same holds for the colours. Slight colour variations may
occur during the production process and are not detrimental to the overall
appearance.
The pure metal surface is suitable in connection with rustic surface structures for
individual internal decorative fittings. These are enhanced by the possibility of a
brown toning. The various products available are characterised by stark surface
structures.
Backing sheets for antique:
1. C 409 real - copper (brown-toned or lacquered)
This copper-variety without special quality requirements is suited as a backing
sheet.
2. A 209 real-aluminium smooth and lacquered (natural colour)
This aluminium-quality can also be recommended, produced in smooth surface
or hammered-structure as an inexpensive backing sheet.
Dimensions and Quality
All antique sheets are delivered in the standard dimensions 2440 mm x 1220 mm.
The tolerance limits for the dimensions along and across the sheets as required in
EN 438 are:
- 0 mm and + 10mm
The antique sheets can be produced in thickness from 1.2 mm to 3.0 mm.
The standard thickness is 1.2 mm, giving a density of 2.1 kg/m².
The limits for variations in thickness are also governed by EN 438:
Nominal thickness Maximum tolerances
0.6 – 1.0 mm ± 0.10 mm
> 1.0 – 2.0 mm ± 0.15 mm
> 2.0 – 2.5 mm ± 0.18 mm
> 2.5 – 3.0 mm ± 0.20 mm
If thicker sheets of antique are required, direct contact with Dekodur® is advised.
Behaviour in case of fire – the standard quality of antique is classified as B1 – B2
when tested according to DIN 4102. For antique sheets in the quality of “Flame
retardant” a direct contact with Dekodur® is advised. This quality is certified by
Lloyd’s Register and fulfils the requirements of IMO FTC.

The Evolution of Copper DEKODUR breaks new ground with the unique
art series. Discover the stylish interior design
in copper – reddish-warm and extraordinary.
Natural finishing processes make it possible for
our international artists to decorate the copper
panels with a patina of filigree structures and
dynamic shapes. The result: The fulfillment of
individual ideas, each motif of the series is unique.
The name dekoart – unique art stands for a high pressure laminate (HPL) with a
hand-coloured copper surface. The motives were designed and coloured by
artists. The 0.035 mm thick metal layer is applied to a core of phenolic resin using
high pressure.
All our products are coated with an UV – lacquer based on acryl. The lacquer has
scratch hardness in EN 438 of
> 1, 5 N.
The surface is unaffected by common household agents / solvents. Alcohol has no
effect. Slight variations of the silky shine / gloss coming from raw copper material are
unavoidable.
Each laminate sheet is unique. The colouring technologies by hand allow, with regard
to motive and colours – and in particular: design – that the unique art sheets are very
simliar, but never identical.
Backing sheets for unique art:
1) A 209 Pure aluminium smooth/hammered lacquered (Natural aluminium
colour)
We recommend this aluminium quality in smooth and in hammered surface as
an inexpensive backing sheet.
2) C 400 Pure copper lacquered or in brown tone and lacquered
This copper product, with no quality specifications, is suitable as a backing
sheet.
Dimensions and Quality
All unique art sheets are delivered in the standard dimensions 2440mm x 1220 mm.
The tolerance limits for the dimensions along and across the sheets as required in
EN 438 are:
- 0 mm and + 10 mm
The unique art steets can be produced in thicknes from 1.2 mm to 3.0 mm.
The standard thickness is 1.2 mm, giving a density of 2.1 kg/m².
The limts for variations in thickness are also governed by EN 438.
Nominal thickness Maximum tolerances
0.6 – 1.0 mm ± 0.10 mm
> 1.0 – 2.0 mm ± 0.15 mm
> 2.0 – 2.5 mm ± 0.18 mm
> 2.5 – 3.0 mm ± 0.20 mm
If thicker sheets of unique art are required, direct contact with Dekodur® is
advisable.
Behaviour in case of fire – the standard quality of unique art is classified as B2 – B1
when tested according to DIN 4102.
For unique art in the quality “flame retardant” a direct contact with Dekodur® is
advised.
This quality is certified by Lloyd’s Register and fulfils the requirements of IMO FTC.
Datenblatt

Aluminum punched

All metal surfaces are available in four different punching patterns and can be combined with the
decors featured in our product lines dekoplus dekolor, dekonova and with the mirror finishe from dekorial starline.

The name dekorial dekostyle metal stands for a high pressure laminate with a pure aluminium surface, which has holes and is laquered. This surface is underlaid with a decorative sheet from the dekoplus – dekonova / dekolor collection. The plain or printed film gives a decorative effect enhanced by the size and shape of the hole. A combination of printed wood reproductions or a graphic printed motive offers an
additional advantage for a decorative application.
If a second aluminium foil with different colours or gloss, is used as a backing, placed
one above the other, the result is a very decorative metal surface with optical depth.
These decorative combinations of a metal film with holes with an underlay are then
applied to phenolic resin, using high pressure.
A special baked enamel on epoxy-resin base or a PU coating on the perforated metal foil is a measure for the protection of the metal surface.
The aluminium layer in dekostyle is generally in the form of a brushed metal surface.
The perforated aluminum layer with dekostyle metal is preferably available in
brushed metal surface.
In the variant dekorial dekostyle wood are real metal laminated plastic plates (HPL)
covered with wood reproductions of different woods, provided with three different
perforation types. The high-quality character of various woods, combined with
mirror-bright metal, develops a unique visual impression. The surfaces of the
different wood types resemble in their mechanical properties those of melamine HPL.
The slight unevenness in the surface in some of the aluminium surfaces laminates is
one of the features of dekostyle. The slight indentations are at the present stand of
the technique and are unavoidable and normal. Slight colour variations occur during
the production and are not detrimental to the overall appearance.
Product data sheet
dekorial dekostyle metal
Langenthaler Str. 4
69434 Hirschhorn/Neckar
Germany
phone 00-49-6272-689-0
fax 00-49-6272-689-30
dekostyle wood
--------------------
dekostyle
2
Arrangement to the hole motives for dekostyle metal:
AP KA BD
KP BG
14
14
20
20
12
12
25
25
20
Round holes: 3mm
Distance between
holes: 20mm
Rowes: parallel
Sqare holes: 8mm
Distance between
holes: 12mm
Rowes: parallel
Sqare holes: 8mm
Distance between
holes: 12mm
Rowes: parallel
Round holes: 12mm
Distance between
holes: 4mm
Rowes: diagonal
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
--------------------
dekostyle
3
Arrangement to the hole motives for dekostyle wood:
AP BG KC
20
20 25
25
20
32
32
Round holes: 3mm
Distance between
holes: 20mm
Rowes: parallel
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
--------------------
dekostyle
4
Four metal foils with holes (A 241, A 250, A 251, and A 256) and 6 different woods
for dekostyle-wood are available for selection. The hole patterns are available in 6
versions as standard production. The extremly large spectrum of products is partly
due to the great extent of the backing sheets. With plain colours and printed
melamine films (fantasy and wood) dekostyle offers more than 400 variations.

Standardstructures for melamine- and
metalsurfaces. Possible combinations:
► Dekoplus dekolor
► Dekoplus dekonova
► Dekorial starline
► Dekorial inox
► Dekorial antique
► Dekorial rustikal

We are engaged in offering WAF with constant vision of surprising innovations. These are manufactured using premium quality materials using advanced German technology and are available in various choices of shades. The metallic range provides you better interior options for spaces like lounges and bars.

Standardstructures for melamine- and
metalsurfaces. Possible combinations:
► Dekoplus dekolor
► Dekoplus dekonova
► Dekorial starline
► Dekorial inox
► Dekorial antique
► Dekorial rustikal

Real stainless steel HPL

Wherever quality and extraordinary interior
design are highly valued, high-grade
steel offers the ideal surface material.

The names dekorial - inox and stratos stand for high pressure laminates (HPL) with a
foil of stainless steel, quality X 5 CrNi 18 10. This German number indicates the
formulation, as well as the mechanical and physical properties of the steel foil. The
metal foil of 0,05 mm thickness is applied to a core of phenolic resin using high
pressure.
The stainless steel surfaces of the inox and stratos products are unaffected by
common household agents and resistant to the following chemical solutions: 10%
nitric acid, 10% phosphoric acid, 10% sulphuric acid, 10% sodium hydroxide, 10%
potassium hydroxide, 10% ammonia and 5% washing soda. Further, alcohol and
other solvents such as petrol, acetone etc. have no effect on the stainless steel
surface.
Contact of the stainless steel surface with foodstuffs in daily use presents no
problems.
The stainless steel product is ideal for highly structured surfaces such as i.e. CRI,
GEK, PNT, and WAF. But also less structured surfaces obtained by a fine sanding of
the surface such as MIC, RON, ROS, WEL, andWES are possible.
The stratos-products have a fine elegant structure which is achieved by a special
treatment of the stainless steel surface.
Slight variations of shine, colour and evenness in the surface of our stainless steel
products, coming from raw stainless steel material and processing are unavoidable
and normal. These variations are not diametrical to the overall appearance.
Backing sheets for inox and stratos:
We recommend 2nd choice stainless steel HPL’s as an inexpensive backing sheet,
alternatively:
1. S 299 GLA
2. A 209 Pure aluminium smooth – lacquered HPL (Natural
aluminium colour)
This aluminium-quality in a smooth surface and also in the hammered version can be
recommended as an inexpensive backing sheet.
Dimensions and Quality
All inox and stratos sheets are delivered in the dimensions 2440 mm x 1220 mm.
The standard sheet contains 2 foils of stainless steel of width 610 mm. These
are butt-joined. The joints are barely visible, and should be removed by cutting
along the butt-joints.
The effective width in the case of waffel structure is only 1200 mm. Here the
single steel sheets have a width of 600 mm.
The tolerances for the dimensions along and across the sheets as required in
EN 438 are:
- 0 mm + 10 mm
The inox/stratos sheets can be produced in thickness from 0.8 mm to 3.0 mm.
The standard thickness 0.8 mm, giving a density of 1.4 kg/m².
The limits for variations in thickness are governed by EN DIN 438..
Nominal thickness Maximum tolerances
0.8 – 1.0 mm ± 0.10 mm
> 1.0 – 2.0 mm ± 0.15 mm
> 2.0 – 2.5 mm ± 0.18 mm
> 2.5 – 3.0 mm ± 0.20 mmDatenblatt

Product Description
The names dekoplus – dekolor / dekonova stand for decorative high pressure laminates, as specified in EN 438-1, in solid colours, in fantasy print, as well as replicas of natural materials such as linen, wood, marble etc.
As defined in the standard, core sheets impregnated with phenolic and/or melamine synthetic resins and a surface layer are impregnated with an aminoplast resin (mainly melamine synthetic resin) and are then pressed together to a high pressure laminate.
The surface layer is a plain coloured paper melamine film in the products with the name dekolor.
The plain coloured paper (dekolor) is uniformly coloured throughout. The colour range is from white to black with a large range of colours inbetween. By later ordering a colour matching is guaranteed in these colours. The papers are free from heavy metals and have a high degree light-fastness.
In dekonova the surface film is printed paper melamine film. The printed papers are printed using engraved printing cylinders. By later ordering a colour martching is guaranteed in these prints. The papers are free from heavy metals and have a high degree light fastness.
According to the Standard the HPL products are classified according to their specific
basic properties in:
1. Standard quality = Type S (thickness less then 2.0 mm)
2. Standard quality = Type S (thickness geater than 2.0 mm)
3. Postforming quality = Type P
4. Standard quality with specified behaviour by fire = Type F
All dekoplus colours can be pressed with 25 surface structures (see dekovario
prospectus).
Backing sheets for dekoplus: RS 16 GLA 008We are engaged in offering Dekolor E 11 with constant vision of surprising innovations. These are manufactured using premium quality materials using advanced German technology and are available in various choices of shades. The metallic range provides you better interior options for spaces like lounges and bars.

Wooden surfaces punched

All wood surfaces are available in two different punching patterns and may be combined with the mirror finishes from dekorial starline.

The name dekorial dekostyle metal stands for a high pressure laminate with a pure Aluminium surface, which has holes and is laquered. This surface is underlaid with a decorative sheet from the dekoplus – dekonova / dekolor collection. The plain or printed film gives a decorative effect enhanced by the size and shape of the hole. A combination of printed wood reproductions or a graphic printed motive offers an
additional advantage for a decorative application.
If a second aluminium foil with different colours or gloss, is used as a backing, placed
one above the other, the result is a very decorative metal surface with optical depth.
These decorative combinations of a metal film with holes with an underlay are then
applied to phenolic resin, using high pressure.
A special baked enamel on epoxy-resin base or a PU coating on the perforated metal
foil is a measure for the protection of the metal surface.
The aluminium layer in dekostyle is generally in the form of a brushed metal surface.
The perforated aluminum layer with dekostyle metal is preferably available in
brushed metal surface.
In the variant dekorial dekostyle wood are real metal laminated plastic plates (HPL)
covered with wood reproductions of different woods, provided with three different
perforation types. The high-quality character of various woods, combined with
mirror-bright metal, develops a unique visual impression. The surfaces of the
different wood types resemble in their mechanical properties those of melamine HPL.
The slight unevenness in the surface in some of the aluminium surfaces laminates is
one of the features of dekostyle. The slight indentations are at the present stand of
the technique and are unavoidable and normal. Slight colour variations occur during
the production and are not detrimental to the overall appearance.
Product data sheet
dekorial dekostyle metal
Langenthaler Str. 4
69434 Hirschhorn/Neckar
Germany
phone 00-49-6272-689-0
fax 00-49-6272-689-30
dekostyle wood
--------------------
dekostyle
2
Arrangement to the hole motives for dekostyle metal:
AP KA BD
KP BG
14
14
20
20
12
12
25
25
20
Round holes: 3mm
Distance between
holes: 20mm
Rowes: parallel
Sqare holes: 8mm
Distance between
holes: 12mm
Rowes: parallel
Sqare holes: 8mm
Distance between
holes: 12mm
Rowes: parallel
Round holes: 12mm
Distance between
holes: 4mm
Rowes: diagonal
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
--------------------
dekostyle
3
Arrangement to the hole motives for dekostyle wood:
AP BG KC
20
20 25
25
20
32
32
Round holes: 3mm
Distance between
holes: 20mm
Rowes: parallel
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
Round holes: 20mm
Distance between
holes: 25mm
Rowes: parallel
--------------------
dekostyle
4
Four metal foils with holes (A 241, A 250, A 251, and A 256) and 6 different woods
for dekostyle-wood are available for selection. The hole patterns are available in 6
versions as standard production. The extremly large spectrum of products is partly
due to the great extent of the backing sheets. With plain colours and printed
melamine films (fantasy and wood) dekostyle offers more than 400 variations.

Aluminum grinding patterns

These impressive decors – with their optical depth –
add a new dimension to every room. Implementing
complex workmanship in these decors, one easily
creates fascinating impressions for today´s high-end
interior design.

Under the name dekorial stratos is to be understood real aluminum laminated
plastic boards (HPL) in different surface treatment and colors. This metal layer is
applied on a phenolic resin core with high pressure.
All implementations are coated with a UV-paint on acrylic base. The paint has an
abrasive hardness according to DIN EN 438 of
> 1.5 N.
The painted surface is resistant to all usual household cleaning agents, solvents and
alcohol. Small gloss-level differences (in case of the light silk gloss) are conditional
through variations in the surface roughness of the aluminium foil.
Smaller impressed dents are unavoidable and normal, in accordance with the
present state of the art. The same applies for the color of the products listed here.
This can vary minimally manufacture-related, however, the general impression is not
disturbed by that as a rule.
This real metal surface is suitable for individual interior design.
Counter-surface for stratos:
A 209 real aluminum smooth and coated (natural color)
This aluminum quality can be recommended as a low-cost counter-surface in
smooth finish and also in hammered structure.
Form of delivery and quality
stratos plates are supplied in the standard dimensions 2440 x 1220 mm.
The tolerance for the length and width nominal dimension must correspond to DIN
EN 438, with the limits
0 mm and + 10mm.
The plate thickness in case of stratos - plates is produced as 0.8 mm as standard
(Weight: 1.4 kg/m² ).
The limits apply also for the thickness deviations according to DIN EN 438.
Nominal thickness Limiting deviations
0.6 Mm - 1.0  0.10 mm
 1.0 Mm - 2.0  0.15 mm
 2.0 Mm - 2.5  0.18 mm
 2.5 Mm - 3.0  0.20 mm
The purchase of thicker stratos plates can be clarified by an in-house inquiry.
Thermal resistance
All stratos products are resistant with a constant loading of
-24°C to +90°C
Short-term loading to
-35°C and +120°C
is possible.
The combustion characteristics of the stratos standard quality corresponds to the
Classification B2 - B1, in accordance with DIN 4102.
stratos plates in the quality "flame-retardant" can be clarified through a direct inquiry.
This quality is certified by Lloyd's Register and meets the requirements of IMO FTC.
A lamination with a protective foil is compulsory in case of stratos. At the latest, after
6 months, the foil is to be removed, since otherwise damage can arise on the
aluminum surface in case of later stripping.

Datenblatt

We are engaged in offering dekodur HGL with constant vision of surprising innovations. These are manufactured using premium quality materials using advanced german technology and are available in various choices of shades. The metallic range provides you better interior options for spaces like lounges and bars.

Illuminated HPL

The four metal surfaces are available in four different punching patterns and can be combined
with each of the dekolux toplux colors.

The name dekolux stands for a decorative high pressure laminate with a translucent core. An unfilled transparent paper (overlay), impregnated with a melamine resin, is used for the core. The surface layer, this is the decorative layer in dekolux, is an overlay sheet with a printed pattern (Melalux) or metal foil with holes (Starlux).
Further, non-woven material with an open structure can be pressed in dekolux
(Toplux).
The printed patterns in the available products have been taken mainly from the product ranges dekostyle and dekotrend. For this reason products in the dekolux range can be readily combined with products from the dekostyle and dekotrend ranges to obtain a highly decorative effect.
The colours of the collection toplux are enhanced by the structures of the fabric and lie within an acceptable tolerance. However, a slight colourintensity- feeling is normal and should be expected.
Backing sheets for dekolux:
Dekolux is used in practice without a substrate and therefore no backing sheet is
required.
Dimensions and Quality
All dekolux sheets are delivered in the dimensions 2440 mm x 1220 mm.
The tolerances for the dimensions along and across the sheets as required by
EN 438 are:
- 0 mm and + 10 mm
The standard thickness of dekolux is 1.5 mm giving a density of 2.5 kg/m².
If thicker sheets of dekolux are required, direct contact with Dekodur® is advisable.
Dekolux with a holed aluminium decorative sheet is pressed with a smooth surface
while printed patterns and netting structures are available in high gloss or in matt.
The limits for the variations in thickness are governed by EN 438.
Nominal thickness Maximum tolerances
1.0– 2.0 mm ± 0.15 mm
> 2.0 – 2.5 mm ± 0.18 mm
A protective surface foil is absolutely necessary. This foil must be removed after 6
months at the latest, as by later removal the aluminium surface could be damaged.
Behaviour in case of fire – the dekolux laminate with an aluminium decorative sheet
in standard quality is classified as B1 – B2 when tested according to DIN 4102.
The dekolux sheets with printed patterns and netting structures in standard quality
are classified as B2 when tested according to DIN 4102.
Application and Processing
Dekolux laminates are intended for use in applicatinos where the material can be
illuminated from behind. The translucent effect together with the colour tones function
as an eyecatcher in the object. Smaller pieces of dekolux are best secured in a metal
framework or grooved together.
For use in larger surfaces it is recommended that dekolux laminates, specially with
holed aluminium sheets, should be mounted with a slightly convex structure. The
max. height of crowning, when using sheets with a thickness of 1,5 mm, should be
approx. 1/3 of the actual width of the sheet. In case of a width less than 600 mm the
max. height of crowning must be reduced. In this way any slight shrinkage in the
sheet can be absorbed. In this curvature over the complete width, together with
indirect illumination, the effect of the pattern is greatly enhanced.
Smaller cuts of dekolux should be gently strained into a frame or affixed into a grove.
Hereby the measurements of the cuts need to be 1-2 mm smaller than the
measurement from grove-base to grove-base.
The Dekolux laminate is intended for use in vertical surfaces in interior applications.
A typical application is in indirectly illuminated wall cladding. Further, ceiling elements
illuminated from behind are ideal applications.

Dekopin magnetic panels can be sawed, milled and drilled using carbide tipped
tools. All HM circular saw blades with a sufficiently high number of teeth and a
trapezoidal/trapezoidal saw tooth pattern are suitable.
It is generally possible that the type of material used may cause flying sparks during
processing.
Always make sure that the panels are flat during transport to prevent cracks and
bends in the surface.
Cleaning of magnetic panels
The HGL high-gloss surfaces are suitable for marking with a board marker.
We recommend board markers from edding (360 and 363). Markings made with
suitable board markers can be wiped off in dry condition.
The MAT matte surfaces are suitable for marking with chalk and can also be used as
a projection surface. We recommend ILLUMIGRAPH liquid chalk from ZIG in this
case. However, the open-pore surface cannot always be wiped completely clean in
dry condition.
Before the first use, after peeling off the protective foil both surfaces must be cleaned
initially in order to remove any residue!
There is no guarantee that dekopin magnetic panels can be cleaned so that they are
completely free of residue, since the quality of the markers used is beyond our
control. Therefore, we recommend testing the various markers before use or to make
Product Data Sheet
dekopin
Magnetic panels
Langenthaler Str. 4
69434 Hirschhorn/Neckar
Germany
phone 00-49-6272-689-0
fax 00-49-6272-689-30
--------------------
Magnetic panels
2
a general cleaning from time to time. Ethyl alcohol and the thinner V 100 from Edding
have been proved for that purpose.
Delivery form and quality
dekodur magnetic panels are delivered in the format 2,440 x 1,220 mm.
The thickness is 1.0 mm.
The tolerances for the length and width must correspond to the permissible
deviations according to DIN EN 438 of
- 0 mm and + 10 mm.
Storage.